ACIM Personal Knowledgebase

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.

====== Wake On LAN ======

his tool is introduced in RouterOS since v3.23 and can send the Wake on LAN MagicPacket to any MAC address of your choosing. If the target device supports WOL, it should wake from sleep. Secure WOL is not supported.

<code bash>
[admin@MikroTik] > tool wol mac=FF:FF:FF:FF:FF
</code>

The WOL tool will send a UDP MagicPacket to the Broadcast address with the MAC address embedded in it.

By default, the magic packet will be sent as an IP broadcast out the default gateway interface, but if you want, you can tell the command to use a specific interface:

<code bash>
[admin@MikroTik] > tool wol interface=ether1 mac=FF:FF:FF:FF:FF:FF
</code>

Pak už stačí jen dát Run script a PC na portu 4 s touto MAC na síťovce nastartuje
Then just create new form script in **System** > **Scripts** > **Scripts** and add these line ''tool wol interface=ether1 mac=FF:FF:FF:FF:FF:FF'' in **Source**.

{{ :mikrotik:wake-on-lan-mikrotik-620x382.png |}}

ACIM Personal Knowledgebase

User Tools

Site Tools

Page Tools